Table of Contents
Advertisement
Setting the clock time
Manual setting
. When radio power is off, press and hold Menu/ info button to
enter the menu setting.
2. Rotate the Tuning control rotary until 'CLOCK SET' shown on the
display. Press the Tuning control rotary to enter the setting.
3. The hour setting on the display will begin flashing. Rotate the
Tuning control rotary to select the desired hour, and press the
Tuning control rotary to confirm the setting. Then rotate the Tuning
control rotary to select the desired minute, and press the Tuning
control rotary to confirm the setting.
Radio Data System (RDS/ RBDS)
When you set the clock time using the RDS/ RBDS function, your
radio will synchronize its clock time whenever it tunes to a radio
station using RDS / RBDS with CT signals.
. When tuning to a station transmitting RDS / RBDS data, press
and hold the Info/menu button.
2. Rotate the Tuning control rotary until a clock symbol shown on
the display. Press the Tuning control rotary to enter the setting.
8
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the WR-22 and is the answer not in the manual?
Questions and answers
why time and date won't stay set on my sangean wr-22 radio
The time and date on your Sangean WR-22 radio may not stay set because many RDS-enabled FM stations do not transmit the correct time. This can cause the clock to be inaccurate. To fix this, change the clock setting from RDS to manual mode in the WR-22 settings menu.
This answer is automatically generated
How do I replace the battery on my remote? I don't seem to be able to control volume from about 25 ft away. Is it battery or something else?