Q-See QT-Series User Manual

How to record manually over the network for systems

Hide thumbs Also See for QT-Series:

Download this manual See also: User Manual

HOW TO RECORD MANUALLY OVER THE NETWORK FOR

DVR

SYSTEMS

MODEL NUMBERS: QT-Series

STEP 1: Turn on your computer and open Internet Explorer.

STEP 2: In the address bar, enter in the IP address of your DVR. (Note: If your

WebCam viewer does not fit the internet explorer, right click above the "New

Tab" button and disable the different toolbars that may be taking space)

1 | P a g e

Page 1 HOW TO RECORD MANUALLY OVER THE NETWORK FOR SYSTEMS MODEL NUMBERS: QT-Series STEP 1: Turn on your computer and open Internet Explorer. STEP 2: In the address bar, enter in the IP address of your DVR. (Note: If your WebCam viewer does not fit the internet explorer, right click above the “New Tab”...
Page 2 HOW TO RECORD MANUALLY OVER THE NETWORK FOR SYSTEMS MODEL NUMBERS: QT-Series STEP 3: Enter your login information (default user name is “admin” and the default password is “123456”) and click “LOGIN”. (If this screen does not appear, see the “ActiveX Controls” guide) STEP 4: Move the cursor to the record button and click.
Page 3 HOW TO RECORD MANUALLY OVER THE NETWORK FOR SYSTEMS MODEL NUMBERS: QT-Series STEP 5: Select the channels you want to activate manual recording for. STEP 6: Move the cursor to “OK”. 3 | P a g e...
Page 4 HOW TO RECORD MANUALLY OVER THE NETWORK FOR SYSTEMS MODEL NUMBERS: QT-Series STEP 7: Your cameras will begin recording; pressing the record button will turn off the manual recording. STEP 8: The recorded footage will be saved to a folder that can be found in “My Documents”.