Favorite Track Selection Across Disc; Fts For- A Single Disc - Yamaha DVD-C740 Owner's Manual

Operation
4 Use _1, •, A, • to pan across the screen.
5 When ENTER/OK is pressed only the panned
picture will be shown on the screen,
6 To exit ZOQH mode, select zoom factor to
"Off' (zoom factor 1) in the menu ban
Note:
- ZOOM mode gets deactivatedwhen starting
playback of next element in FTS acrossdiscand
Shuffle acrossDiscmodes.
Favorite Track Selection Across Disc
• This FTS funct on allows you to create a list
favorite tracks by selecting tracks from different
discs available inthe disc tray,
• The supported discs are CDDA, HP3, VCD,
SVCD.
• Favorite Track Selection (ITS) list contains up to
I00 elements acrossall the discs on the tray,
Storing a Program
| Press OPEN/CLOSE and load preferred discs
onto the disc tray.
2 In STOP mode, select ITS in the menu bar-,
3 Press • in the menu bar.
-_ The ITS window menu appears.
4 Select All Discs option.
Storing entire disc as the FTS
1 Press • to select DISC,
2 Use • and _ to select the require disc list for all
the loaded discs in the disc tray,
3 Press ENTER/OK to store the entire disc
selection.
1
2
3
Storing album/title
Press• to select ALBU PI/TRACK. Albums are for
HP3 discs and Tracks for (S)VCD.
Use • and _1to select the require Album/Track,
PressENTER/OK to store the entire selected
Album/Track_
-_ The Album/Track, number will be added to
the program list.
Storing track/chapter
| Press • on the selected TR/kCK/INDEX. Tracks
are for MP3/CDDA discs and Index for S(VCD).
.O Thetrack/chapter number will be highlighted.
2 Use • and _1 to select the required TracWlndex.
3 Press ENTER/OK to conf_lTn the selection.
.O The selected Track/Index wll be added to the
program list.
4 Press ON SCREEN to exit the ITS menu,
Switching a Program OFF
| Use_ to move to ITS.
2 Press • or _ to select OFF,
3 Press ON SCREEN to exit.
Erasing a selection in a Program
| While playback is stopped, select ITS in the menu
ban
2 Use • to select PROGRAM.
3 Use • and _1 to select the required number.
4 Press ENTER/OKto erase the selection,
g Press ON SCREEN to exit.
Erasing all selections
| While playback is stopped, select ITS in the menu
ban
2 Use • to select CLEAR ALL and press ENTER/
OK
"_ All selections will be erased.
3 Press ON SCREEN to exit.
Note;
- Pressing PLAYXCHANGE or OPEN/CLOSE during
playback wil! erase the selected Program if any.
- With VCD 2.0, set the PBC (Playback Control) to
off
FTS for a
Single
disc
| Select ITSin the menu ban
2 Press • in the menu bar.
,O The ITS window menu appears.
3 Select CURRENT DISC option.
19