Whirlpool DP920QWDB3 Use And Care Manual page 18

Disconnecting the dishwasher
1. Turn hot water off. (This can be done
after the last rinse.)
2. Press the red button on the connector to
release the water pressure.
3. Lift slightly on the hose connector while
pulling down the locking collar. Pull down
on the connector.
4. Empty any remaining water from the
connector by turning the connector
upside down.
5. Unplug power supply cord and return to
storage compartment.
6. Return hoses to storage compartment.
Locking collar
Hose connection
Electrical connection
A power supply of 120 volts, 60Hz AC, 15 or
20 amps, is required. For your personal
safety, this appliance must be grounded.
This appliance is equipped with a power
supply cord having a 3-prong grounding
plug. To minimize possible shock hazard it
must be plugged into a mating 3-prong
grounding type wall receptacle, grounded in
accordance with the National Electrical
Code and local codes and ordinances. If a
mating wall receptacle is not available, it is
the responsibility and obligation of the
customer to have a properly grounded
3-prong wall receptacle installed by a
qualified electrician.
3-prong ground-
Power supply
cord
3-prong
grounding
type wall
receptacle
Fire Hazard
An extension cord should not be used
with this appliance.
Do not, under any circumstances, remove
the power supply cord ground prong.
Such use may result in a fire, electrical
shock, or other personal injury.
Converting a portable dishwasher
to a built-in
Your Whirlpool Portable Dishwasher can be
converted to a built-in (undercounter) model
by using conversion kit No. 4317856. The kit
18
is available at your Whirlpool dealer or
authorized Whirlpool service company.
Instructions are included with the kit.