Samsung DVD-L200 User Manual page 12

I ENGLISH ]
Connecting to a Stereo Component
Optical Digital Cable
(Sold Separately)
Audio component iii equipped with optical i C iinect to optical
digital input jack
digital input jack
After the completion of above connections;
Set the 'Digital Output" to "PCM" (see page 49) in 'Audio Setup"
• Digital connection to audio component without Dolby Digital decoder
• Audio CD
Play the disc
When connecting digitally, DTS-encoded audio tracks will produce distorted sound
• DVD Disc
When playing a Linear PCM Audio encoded disc, you must use the digital connection
method shown above
Only use an optical Digital Cable which has been designed for use with portable DVD
Connecting to a Stereo Component
IENGLISH]
• You can enjoy full and dynamic surround sound by connecting a Dolby Digital/DTS
digital surround processor or amplifier to the optical digital jack on the DVD player
• When using DTS digital surround, select the DTS audio by using the disc menu screen
or function adjustment screen
Connect to an Optical Digital Input Jack
Optical Digital Cable
(Sold Separately)
Dolby Digital (5 1-Channel)/DTS
processor or amplifie[
After making the connections shown above;
Set the "Digital Output" to "Bitstream" (see page 49) in "Audio Setup"
Caution
• To play a DTS disc, you need a DTS processor or amplifier
• If the DTS processor or amplifer you want to use does not have an optical digital input jack,
digital connection is not possible
• Refer to owner's manual of the processor or amplifier for details on connections