Netware - NEC 4400 - SuperScript Color Laser Printer User Manual

N W 3.
ET ARE X
Complete these basic tasks to configure NetWare 3.x bindery-
based services for your printer.
1. Log in to NetWare 3.x with Administrator rights and
start PCONSOLE.
2. Define the Print Queue.
a. Select Print Queue Information from the Available
Options menu and press
b. Press , type a name for the new queue to be
INSERT
serviced by the NIC and press
to return to the Available Options Menu.
3. Define the Print Server.
a. Select Print Server Information from the Available
Options menu and press
b. Press , type the NIC Print Server Name and
INSERT
press .
ENTER
note:
The Print Server Name you enter should match
the name shown on the Network Settings page under
Novell Network Information.
4. Define the Printer.
a. Press with the new Print Server Highlighted,
ENTER
select Print Server Configuration and press
then select Printer Configuration and press
b. In the Configured Printers list, select an unused
printer number and press
Configuration screen, define a new name for the
printer if desired. (The printer name is displayed in
various NetWare printing messages.)
c. Press to exit and select Yes to save the
ESCAPE
changes. Press
ESCAPE
Server Configuration menu.
86 SuperScript 4400 Series — User's Guide
.
ENTER
. Press
ENTER ESCAPE
.
ENTER
ENTER
ENTER
. In the Printer <#>
ENTER
again to return to the Printer
5. Assign the Print Queue.
a. Select Queues Serviced By Printer and press
Highlight the desired printer on the Defined Printers
list and press
b. Press
INSERT
Select the desired queue and press
Priority level (recommended choice is 1) and press
.
ENTER
c. Press
Alt-F10
6. Configure the network printer using MAP and the
Network Administration Page. The instructions are
shown on page 85.
7. Confirm Successful Configuration.
a. Turn the printer off and on and wait for a Network
Settings page to print. If the network is large, this
may take several minutes.
b. The Novell Connection Information area on the
Network Settings page displays the printer name, file
server, queue, etc. If it displays Attached: Yes, this
confirms that the NIC Print Server is ready to accept
print jobs. If not, verify that the Print Server name
matches exactly the Print Server name that was
entered in PCONSOLE.
,
8. Install and Configure Your Printer Driver
.
In Windows, use the Add Printer feature to install and
configure a SuperScript 4400 printer driver in each
workstation that will access the network printer.
note:
SuperScript 4400 printer drivers are on the
SuperScript 4400 Series CD that comes with the printer.
Specify that the printer will be attached as a Network Printer,
and set the Port to the printer queue you just created. (The
Windows NT 4.0 driver installs automatically to LPT1:. After
installation, you can manually reset the port to your NetWare
queue.)
.
ENTER
to display the Available Queues list.
ENTER
to exit PCONSOLE.
.
ENTER
. Assign a