Installinga New Bag; Removing A Filledbag - Whirlpool 800 SERIES Use & Care Manual

Installinga New Bag
Before installing a new bag, be sure:
1. The drawer side is securely locked,
2. The container is clean and free of sharp debris that may have
punctured the bag.
De not use any kind of bag other than those designed especially
for use in your compactor. Compactor bags may be purchased
from your Whirlpool dealer or:
Whirlpool Corporation
Attention: Customer Service Dept,
1900 Whirlpool Drive
LaPorte, IN 46350
You may also order approved compactor bags by calling our
toll-free telephone number: 1-800-253-1301,
1. Place folded bag into the drawer, Open bag and pull top
edges over the drawer top.
2. Lock bag into place by pulling the four prepunched holes over
the bag retainer buttons, Holes will expand over the buttons
without damaging the bag.
3. Press inside of bag against the drawer bottom, sides and cor-
ners for a smooth fit.
Removing a FilledBag
When the trash is compacted to the top of the drawer, remove
the bag. If the bag is too heavy, compact less trash before emp-
tying in the future.
Cut Hazard
Do not touch sharp objects that have cut through
the bag,
Doing so can result in cuts.
1. Pull the drawer completely open.
2. Remove top of bag from retainer buttons. Pull up all four
bag cuffs.
3. Close bag provided with twist tie.
4. Push side-lock latch down and tilt drawer side open.
10
5. Lift out bag.
R