Zero Search; Blank Search - GE 13TVR70 User Manual

Using the Playback Features
Zero Search
This feature allows you to quickly return to a time counter reading
of 0:00:00. This is especially convenient when you want to watch a
segment of the tape several times.
1. Insert the prerecorded tape. Press STOP.
2. Press DISPLAY twice to display only the time counter.
3. Use PLAY, FF, or REW to locate the start of the segment you
want to repeat.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape and press STOP when you reach the
end of the segment you want to repeat.
6. Press SEARCH twice to display the ZERO SEARCH screen. The
current time counter is displayed.
ZERO SEARCH
Current tape counter is
0:12:34
Press REW to go to
0:00:00
Press SEARCH to exit
ZERO SEARCH
Current tape counter is
-0:12:34
Press FF to go to
0:00:00
Press SEARCH to
exit
7. Press REVVto return to 0:00:00. The time counter is displayed in
the upper right corner of the screen during the search. If the
current time counter has a minus in front of it, press FF.
Blank Search
The TV/VCR will search for blank portions of the tape that are more
than six seconds in length.
1. Insert the pre-recorded tape and press STOP.
2. Press SEARGH three times to display the BLANK SEARCH screen.
BLANK SEARCH
Press FF to begin
searching for bLank
section of tape.
Press
SEARCH
to exit
3. Press FF to begin searching for a segment that is at least six
seconds of blank tape.
4. Press STOP to stop BLANK SEARCH.
/
/
16