Index Search - GE 13TVR70 User Manual

Using the Playback Features
Index Search
The TV/VCR automatically records index marks on the tape each time you begin
recording. During playback you can locate the program you want to play by the
number of index marks. Your TV/VCR has two index playback features. You can
select a specific index number or search by scan and play.
To Select Scan and Play Index Playback
1. Insert the pre-recorded tape and press STOP.
2. Press SEARCH to display the INDEX SEARCH screen.
3. Press FF to scan forward or REW to scan in reverse.
When the TV/VCR locates an index mark, it will stop
and play a few seconds of the program following
the mark.
4. At any time during the search, press PLAY to stop
searching and begin playback, or press STOP to stop
the search.
If the beginning or end of the tape is reached during the
search, End of tape appears.
To Select a Specific Index Number for Index Playback
1. insert the pre-recorded tape and press STOP.
2. Press SEARCH to display the INDEX SEARCH screen.
INDEX SEARCH
Press REU or FF
to
begin scanning
or
Enter a specific
Index number
INDEX SEARCH
Scanning...
Index number
01
Press STOP to cancel
3.
4.
INDEX SEARCH
Press REW or FF
to begin search
or
Enter a specific
Index number
Press SEARCH to exit
Use the number buttons to enter the number of
the index mark you want the TV/VCR to
search for.
Press FF to search forward or REW to search in
reverse.
When the TV/VCR locates the index mark, it will
begin playback.
When using index playback, the following index
marks may be skipped by the TV/VCR.
• The mark closest to the current location on
the tape.
• The mark at the beginning of a recorded
segment that is five minutes or less.
• The mark at the beginning of the tape.
15