Advertisement
ooooooooooooooooooooooooooooo
ooooooooooooooooooooooooooooooo
ooooooooooooooooooooooooooooooooo
ooooooooooooooooooooooooooo
ooooooooooooooooooooooooooooooooooo
oooooooooooooooooooooooooooooooooooo
oooooooooooooooooooooo0ooooooooooooo
oooooooooooooooo
.... o oooooooooo!i °
0000000000000000000000000000000000000
0000000000000000000000000000000000000
0000000000000000000000000000000000000
0000000000000000000000000000000000000¢
O000000000000000000000000000000000000C
O000000000000000000000000000000000000C
oooooooooooooooooooooooooooooooooooooc
oooooooooooooooooooooooooooooooooooooc
( s,voozE )
i
ii
/
Volume
OPERATE
THE P d)IO
1.
Plug the power cord into any 120-V AC household outlet.
2.
Turn the FUNCTION SELECTOR to ON.
3.
Slide the AM/FM BAND switch (located on the back of the unit) to the desired
broadcast band.
4.
Turn TUNING knob to select a station.
5.
Adjust the VOLUME control to your preferred listening level.
6.
To turn the radio off, slide the FUNCTION SELECTOR to OFF.
BUILT-IN AFC
The Built-In Automatic Frequency Control (AFC) works only on FM. It helps to
reduce drift on FM reception and to keep the radio locked in on the FM station to
which it is tuned.
When tuning in FM stations, you may notice that often the station you desire can
be heard on two or three nearby points on the dial. Always tune carefully to the
loudest and clearest point.
A.N'W24NAS
AM Antenna - A built-in ferrite rod antenna eliminates the need for an outside
antenna for AM reception. Rotating the unit slightly may improve reception of
distant AM stations.
FM Antenna - The power cord acts as your FM antenna. The power cord picks up
moderate to strong stations and eliminates the need for an external antenna in
most strong signal areas. Be sure the power cord is stretched out to its full length.
Do not coil or bunch the cord together. Changing position of the power cord may
improve reception.
Advertisement
