Table of Contents
Advertisement
Quick Links
Vehicle Parking Sensor System
Model: SBAR
Installation/User Manual
Features:
• 3 Ultra Sonic Rear Obstacle Sensors
• Mounts on Any Vehicle
• Automatically Turns on when Vehicle is in Reverse
• Mounts on the vehicles license plate or directly to the
bumper.
• Heavy Duty Chrome plating for long life.
• Waterproof and dust proof
Advertisement
Table of Contents
Related Manuals for Audiovox SBAR - SBAR Bar-Type Chrome Back-up Sensor
Summary of Contents for Audiovox SBAR - SBAR Bar-Type Chrome Back-up Sensor
- Page 1 Vehicle Parking Sensor System Model: SBAR Installation/User Manual Features: • 3 Ultra Sonic Rear Obstacle Sensors • Mounts on Any Vehicle • Automatically Turns on when Vehicle is in Reverse • Mounts on the vehicles license plate or directly to the bumper.
-
Page 2: Table Of Contents
TABLE OF CONTENTS Warnings Product Description Packing List Installation Instructions Operating the System Testing the System Specifications Maintenance Troubleshooting... -
Page 3: Warnings
2. You are responsible for ensuring that the installation of this product does not void or affect the vehicle manufacturer’s warranty. Audiovox Electronics Corporation or its subsidiaries are not liable in full or in part for improper installation resulting in loss or damage to your property, or for voiding all or part of the vehicle manufacturer’s warranty. -
Page 4: Product Description
Product Description The SBAR Vehicle Parking Sensor System is designed to assist the driver by providing a warning tone when there are obstructions in the area behind the vehicle whenever the vehicle is shifted into reverse. Never rely solely on this product to ensure the area is clear of children and/or obstructions. -
Page 5: Packing List
Packing List The model SBAR monitor package consists of the following items: 1. Chrome Sensor Bar − 1 qty Part # 31062380 2. Buzzer – 1 qty Part # 31062150 3. 2.5m Power Supply Cable − 1 qty Part # 31062160 4. -
Page 6: Installation Instructions
Installation Instructions READ THIS MANUAL COMPLETELY BEFORE INSTALLATION We have included all of the items needed for most standard installations. However, since all vehicles are different, we recommend that you review your vehicle completely before starting. SBAR Installation Determine the best location on your vehicle. The SBAR may be mounted below the bumper for better coverage if your vehicle does not have a clear path from the license plate or is obstructed by a rear spare tire. - Page 7 Installing the SBAR on the License Plate 1. Remove the rear license plate to determine the best way to run the power wires to the reverse lights. It is important to use the Reverse lights and not the license plate illumination lamp or other lamps. The system is designed to come on when the vehicle is in reverse gear only.
- Page 8 Wiring the Power to the Vehicle’s Reverse Lamp 1. Locate the reverse lamp in the tail light assembly. You may be able to access the wires for the lamp from within the trunk, behind a panel, or depending on your vehicle you may have to remove the tail lamp. Follow the procedure that is recommended by your vehicle manufacturer for replacement of a light bulb.
- Page 9 Installing the Buzzer Module 1. The buzzer can be located anywhere in the vehicle. Find a suitable location, generally at the rear of the inside passenger compartment. Using the supplied double sided tape, apply the tape to the module and then place on a clean, flat surface.
-
Page 10: Operating The System
Operating the System The SBAR operates when the vehicle is shifted into reverse. The back up sensor system is designed to send out an ultra sonic signal that detects obstructions behind your vehicle for an average of 6 feet. If an object is located, the system will sound the buzzer. -
Page 11: Specifications
Specifications Power Supply DC12V Power Consumption <6W Current Draw <400 mA Operating Temperature Range 0 to 50 Fuse 2 Amps Maintenance Though your system requires little care, you will still need to maintain its condition and performance by following the guidelines below. •... -
Page 12: Troubleshooting
Troubleshooting Symptoms Solutions 1. Check the wiring and connections The SBAR does not come on 2. Check the fuse in the power harness after the vehicle is started and 3. Check the power connection on the at the vehicle is in reverse the reverse lamp Backup sensors keep sounding Clean the bar lens with a soft cloth. - Page 14 © 2008 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788...
Need help?
Do you have a question about the SBAR - SBAR Bar-Type Chrome Back-up Sensor and is the answer not in the manual?
Questions and answers