Audiovox Advent PSD100 Installation Manual
  1. Manuals
  2. Brands
  3. Audiovox Manuals
  4. Automobile Electronics
  5. Advent PSD100
  6. Installation manual

Audiovox Advent PSD100 Installation Manual

Advent front or rear parking sensor system
Hide thumbs
Table of Contents

Advertisement

Quick Links

Front or Rear Parking Sensor System
Model: PSD100 / PSD100C
Installation Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Advent PSD100 and is the answer not in the manual?

Questions and answers

Related Manuals for Audiovox Advent PSD100

Summary of Contents for Audiovox Advent PSD100

  • Page 1 Front or Rear Parking Sensor System Model: PSD100 / PSD100C Installation Manual...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Warnings..................4 Product Description ..............5 Packing List ..................6 Installation Instructions ..............7 Mounting the Sensors ............7 Installing the Power Harness (REAR)......9 Installing the Power Harness (FRONT)......10 Mounting the Speaker.............11 Mounting the Mute/On-Off Button .........12 Control Module Dip Switch Settings ......12 Mounting the Control Module ........13 Setting the Learning System............14 Specifications................15...
  • Page 3 Features • Front or rear install • Adjustable range to 7ft • Adjustable sensitivity • Upgradeable to a 4-sensor system (requires part #: PSD200/PSD200C) • Learning capability to ignore vehicle mounted objects • Auto-mute capability for use with trailer • Easy install active learning front system •...

  • Page 4: Warnings

    2. You are responsible for ensuring that the installation of this product does not void or affect the vehicle manufacturer’s warranty. Audiovox Electronics Corporation or its subsidiaries are not liable in full or in part for improper installation resulting in loss or damage to your property, or for voiding all or part of the vehicle manufacturer’s warranty.

  • Page 5: Product Description

    This product is not intended to replace existing safety procedures, but rather to add an additional safety tool for your vehicle . Packing List The model PSD100 Front or Rear Parking Sensor System consists of the following items: 1. Control Module 2.

  • Page 6: Installation Instructions

    Installation Instructions Before installing this product, take time to familiarize yourself with the items in the box and use the packing list to verify all parts are present. Mounting the Sensors Choosing the Correct Sensor Sleeve Use the application guide below to determine whether a sensor sleeve will be required.
  • Page 7 Marking and Drilling Holes Figure 1 (2 sensors) Figure 2 (4 Sensors) 1. Mark the locations of the sensors on the front or rear bumper using a grease pencil. a. Identify the sensors height on the bumper and mark. The sensor height should be between 18”...
  • Page 8 Installing the Sensor Sleeve and Sensors NOTE: When installing the sensors into the sensor sleeves, push on the outer ring of the sensor only. Never push on the center of the sensor. 1. Ensure sensors and sleeves are upright (all products have an alignment mark on the top).

  • Page 9: Installing The Power Harness (Rear)

    Installing the Power Harness (REAR) Tap/Run Connection 1. REAR SENSORS - POWER HARNESS INSTALL. For installation in the REAR of the vehicle, locate a source of reverse power (usually at taillight assembly) and accessory power (usually cigarette lighter). REVERSE POWER Using the tap connector supplied, perform the following steps: Place the un-stripped positive reverse power lead wire on the run channel.

  • Page 10: Installing The Power Harness (Front)

    Installing the Power Harness (FRONT) Tap/Run Connection 1. FRONT SENSORS - POWER HARNESS INSTALL. For installation in the FRONT of the vehicle, locate a source of accessory power (usually cigarette lighter). ACCESSORY POWER Place the un-stripped accessory lead wire on the run channel.

  • Page 11: Mounting The Speaker

    Mounting the Speaker The speaker has three volume settings: Off, Hi, and Low. Since the speaker can be adjusted as needed, you should mount the speaker in an accessible location in the interior. It is recommended that the speaker for the Rear detection system is mounted behind the driver and that the Front detection system is mounted in front of the driver.

  • Page 12: Mounting The Mute/On-Off Button

    4. Mount the button and secure with the supplied locking ring. 5. Attach the cable connecting the button to the module. Control Module Dip Switch Settings The PSD100 has a number of settings. You can modify these settings at any time. SETTING...

  • Page 13: Mounting The Control Module

    Mounting the Control Module Determine a dry place inside the vehicle (out of the way) to mount the control module (e.g., behind an inner body panel), making sure that all wiring will reach the intended location. 1. Plug the sensor wires, speaker and power harness into the control module before mounting.

  • Page 14: Setting The Learning System

    Setting the Learning System (Rear Sensors) If an object mounted on the vehicle is causing the Rear sensor system to false alarm (tow bar, rear mounted tire, bicycle rack etc.) you can ‘train’ the PSD system to ignore these obstacles. 1.

  • Page 15: Specifications

    Specifications Power Supply DC9V-DC16V Current Draw <120mA Detecting Distance 0ft – 7ft Sensor Cable Length 19.68ft Operating Temperature Range -0°F ~ 176°F Maintenance Though your backup system requires minimum care, you should maintain its condition and performance using the following the guidelines: •...
  • Page 17 © 2008 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppage, NY...

This manual is also suitable for:

Advent psd100c

Table of Contents