Sleep Timer - Philips Flat TV 42PF9936 User Manual

Use of the remote control RC4334 )
Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.
Remark' in VGA mode only some buttons are vahd,
/ .......
DVD TV SAT AMP
Press the SELECT button repeatedly
to select one of the system modes in
which
the remote control can be
used. If no action is being undertaken
within 2 seconds, the remote control
returns to "iV mode.After an action
in the selected system mode the
remote control will remain in this
mode for 60 seconds and will then
return to TV mode.
\ .............................................................. z
INFO Display information
To display the channel number, the
name (if it exists), the time, the sound
mode and the time remaining on the
timet_
Press again to display the ratings
selected.The volume level and the
smart control adjustments are then
displayed each time they ate used.
O 1144 mml__
Audio andVideo equipment buttons.
TV I PC
Press one of these buttons to switch
the television between TV or PC
mode.
SURR Sound mode
Incredible surround
With stereo transmission, and when
Incredible surround is selected, it
seems as though the loudspeakers
are spread further apart from one
another.
Dolby Surround
Optimal with Dolby surround _
signals. Enables you to experience the
effect of Dolby Surround Pro Logic,
reproducing a rear sound effect. See
Sound menu, DolbyVirtual p. 2.
Note:You can make the same selection in
the Sound menu, Dolby Virtual, p, 2,
©©©
@©©
©@@
®©
HD Press this button to use the
remote control directly in the HD
mode for HD devices (eg. SetTop
box).
Press lx for HD-A mode,
press 2x for HD-D mode.
Man #actur_d under license from Dolby Laboratones
'Dolby"Pm Logic' and the double D symbol are trademarks of Dolby Laboratories
POWER (_)
Press to turn the TV on or off.
.... Tne TV Is never powered off completely ::
unless it is physically unplugged.
'OK Press this button to displaythe '
r_w iv SAT program list or to activate your
choice or to confirm when in the
menus.
MENU Main menu on/off. See p. 2.
CC Closed Caption
On/Off/On during mute
/1 TO adjust the volume.
m_ Interrupt the sound or restore it.
P Channel selection
To browse through the'iV channels
or sources stored.
019 Digit buttons
To select aTV channel.
For a two digit program number,
enter the second digit before the
dash disappears.To switch
immediately to a selected one digit
TV channel, keep the digit button
pressed a bit longer:
AV+ To select connected devices,
see p. 9.
- To type the digital seperator for
digital channels.
SLEEPTIMER
To select the length of time before
the set automatically turns off (from
15 to 240 minutes).
PIP When inVGA or HDMI Node,
pressing the PIP button will bring up
a smaller second window within your
main screen enabling you to watch a
"iV channel and a picture from a
device connected to AV3, at the
same time.
/