Philips Flat TV 42PF9936 User Manual page 17

Using in PC monitor mode )
Your TV can be used as a computer monitor.
You must first of all connect the computer and adjust the resolution (see p, 8).
Choosing PC mode
Press the PC button on the remote control to switch the TV to PC mode.
Press the TV button to return to TV mode.
If there is no PC signaIfor more than five seconds, theTV automaticaIly goes into standby mode.
Using the PC menus
Picture TV
Sound PC
Features HD
Ins_!l
Mode
Z f PC mode
Picture I_ Brightness
Audio selection Picture
Features Horizontal
Reset to Factory Vertical
Mode Color Temp.
I Features
Phase
Clock
Format
PIP
Auto Adjust
J
Press the MENU button to access the specific settings of
the PC monitor mode. Use the cursor buttons to adjust
them (the settings are automatically saved).
Picture
• Brightness/Picture: to adjust the brightness and
contrast.
• Horizontal/Vertical:to adjust the horizontal and
vertical placing of the image.
• Color Temperature: to adjust the colors (cool, normal
or warm).
Audio selection
To choose the sound reproduced on the TV
(PC/HD or TV).
Note:
- You must choose TV mode before_going to TV/HD mode,
- To listen to the sound from a HD device in PC mode, take
cam you also connected the audio cables to the HD device.
Features
Phase/Clock: eliminates the horizontal (Phase) and
vertical (Clock) interfering lines.
Format: to choose between large screen (Fullsereen
or the original (Native) format of the PC screens,
PIP: change the Size and Position of the PIP window on
the screen when the PIP button is used.
Auto adjust: Position is set automatically.
Reset to Factory
To return to the factory settings
Mode
To come back toTVmode.
14