Enabhing Hdmi Controh Of Cec Devices - Mitsubishi Electric 3D DLP 642 series Owner's Manual

OlEO "
25
Many newer HDMR devices have a feature called
Consumer Electronics Control (CEC) or HDMR Control.
HDMR Control allows one device, such as the TV, to
control other devices, such as an AiV receiver or disc
player. Use of CEC is optional.
Each manufacturer chooses which CEC functions to
support so it is difficult to predict which devices and
features are compatible with Mitsubishi's HDMI Control.
You may find that CEC functions for a specific device are
limited.
4_
Rfprompted for a name, high-
light a name for the device
and press ENTER to add a
check. The device itself may
later override the name you
assign.
Highlight On and press ENTER
to add a check.
& Highlight EXmTand press ENTER to close the New
Device Found screen.
Note: At any time after completing Auto Rnput Sens m
ing, you can set the TV's HDMI control on or off
in the Inputs > HDMI Control menu.
Enabling HDMI Control
of CEC Devices
To ensure proper detection
o Power on HDMR devices before connecting
them to the TV.
Connect and set up HDMI devices one at a
time.
2,
3o
Note:
Power on the device and allow it to complete the
power-on sequence (boot up). Stop any playback.
Connect the device to one of the TV's HDMI inputs.
When the TV detects the connection, the New
Device Found screen will appear.
See 'qf the New Device Found Screen Has No
HDMI Control Option" on this page if an HDMI
Control option is not offered.
New Device Found screen with HDM/ Control option.
This screen displays on!y if the device's HDMI Control is
enabled.
For assistance ca((1(800) 332=2119