Mitsubishi Electric 3D DLP 642 series Owner's Manual page 16

16 2. TVMenus
Setup
Setup
Menu
Antenna
Audio
Displays on=screen menus in either English or Spanish.
Spanish
Selects the current language for a digital program from the ANT input. A digital program may include
as many as seven language choices or no language choice.
Setup
>
Note:
o When the
You must
Time
Date
CUock
Set the TV clock to:
Use the TV Timer to power on the TV automatically at a time you specify
Lock the TV by time
Daylight Saving Time change occurs, you must open this menu and set the TV's clock ahead or back.
reset the TV's clock after an interruption of power such as unplugging the TV's power cord.
Highlight the Clock icon and press ENTER or _' to highlight the time. To edit time and date:
Press ENTER to select the item to change.
Press ,& V to change values. Press ENTER to confirm entries.
Press _ _ to move to another column.
Time
Zone
Daymight
Savings
Eastern, Centram, Mountain, Pacific, etc.
Off, On Select the setting for your area
Setup
The Timer tells the TV to power on automatically at a time you set. Use this menu to set a day,
time, input, and channel for the Timer. If the TV is already on at the set time, the TV will automati=
cally change to the designated channel or input.
The TV clock must be set before you can use the Timer feature.
As a reminder that the TV Timer is set, the TV POWER indicator flashes slowly while the TV is powered off.
When the Timer turns on the TV, press any key on the remote control to keep it from turning off after five minutes.
Timer On, Off l Select On to enable the Timer.
Day Daimy, Mon-Fri, (every) Sunday, (every) Monday,
(every) Tuesday, etc.
Time To set the time for the TV to come on:
Select the day or days of the week for the Timer to
turn on the TV.
1. Highlighted the time and press ENTER.
2. Press A T to change values. Press ENTER to confirm entries.
Input
Channem
Ant, DVD, VCR, etc.
Select the input you want displayed when the TV comes on. Choose from the defined and enabled
inputs that appear in the Input Selection menu.
If the source is the ANT input, press A V to select a channel number or press and hold to scroll quickly.
For assistance call 1(800) 332=2119