Appendix B: Specifications - Mitsubishi Electric DLP WD-52631 Owner's Manual

Appendices 91
Appendix B: Specifications
Projection System DLP, 0.65" chip, 1920 x 1080 pixels with Smooth Picture
TM
150-watt VlP type
i
Channel Frequency Reception
Over-the-Air: VHF 2-13, UHF 14-69
Analog Cable: 1-125
Analog NTSC, Digital ATSC with sub-channels (all 18 video
Over the Air: formats)
Cable: Analog NTSC (non-scrambled)
Channel Type* Digital QAM 64 and 256 with sub-channels (non-scrambled)
CableCARDTM:
(WD-52731, Authorized scrambled and non-scrambled digital channels
WD-65731)
* Note for Digital Channels: The channel numbers displayedon screen are determined by the broadcasteror cable company and can
i
vary from the standard frequency number. If there is no channel-numberinformation providedby the broadcaster or cable company,the
i
TV createsa channel number. The created channel number uses the frequency numberas the main channelnumber and the program
numberas the sub-channel number. When using an authorized CableCARD,the channelnumbers are determined by the cable company.
Antenna/Cable input
Component Video (WPr/Pb)
2 RF
F connector, 75-ohm
............................................................................................................................................... connector ....................................................
HDMI EIA-861B stan- Video: 60 Hz: 480i, 480p, 720p, 1080i
dard for digital audio 24 Hz, 30 Hz, 60 Hz: 1080p
and video Audio: PCM stereo
EIA-770.1 & EIA 770.2
480i, 480p, EIA 770.3
720p and 1080i (video
standards)
RCA Pin Plug (EIA-770.3 Standard Levels and
Timing)
Y: 1.0 Vp-p (includes sync), 75-ohm
Pr: 700 mV p-p, 75-ohm
Pb: 700 mV p-p, 75-ohm