Panasonic DIGA DMR-E85H Operating Instructions Manual page 11

If you are using a cable TV box, set the following:
eCable TV box connection channel (Ch2/Ch3/Ch4/L3)
-If you are connecting the cable TV box to this unit's L3 terminal,
select "L3".
-If you are connecting the cable TV box to this unit's RF terminal,
seIect "Ch2", "Ch3" or "Ch4", according to the cable TV box
setting.
eCable TV box brand
(Select "Not Iisted" if you cannot find your cable TV box on the
list.)
elR signal code
Make sure your cable TV box is set to the channel that appears
on screen and press ]ENTER]. A test is performed.
Is your cable box now turned to channel 09?
(No )
-If the cabb TV box has changed to channel 09, select "Yes" and
press ]ENTER].
-If the cable TV box is still set to the same channel, select "No"
and press [ENTER]. Repeat this step until the cable TV box
changes to channel 09.
• The set contents are displayed together
Zlpcode _11111(USA)
Cable -Yes
Cablebox- NO
-If the information is correct, select "Yes, end setup" and press
[ENTER].
-If the information is not correct, select "No, repeat setup
process" and press [ENTER] to start the setting again.
Once you confirm the input content, the following screen appears.
What would you ike to do now?
i
3
Press [ENTER].
A television reception screen or a blue background screen is
displayed.
If you do not want to use TV Guide On Screen system
=* page 43, Auto channel/clock settings
4
Press [5 DVD POWER].
Leave the unit turned off until the unit downloads the television
program list. This may take up to a maximum of 24 hours.
eWhen the unit is connected to a cable TV box, the cable TV box
must be turned on in order 1o download the tebvision program
list.
eWhen the unit is connected to a cable TV box, note that the
television program list may not be downloaded correctly if you
change the channel of the cable TV box while the unit is turned
off.
If you find "There is no data for this screen" on the television when
you turn the unit on, the unit has not yet downloaded the program
list.
J To use immediately (Manual Clock Setting) J
Set the clock manually.
However, the program list is not displayed until the unit downloads
it. Timer program recording is only possible manually.
1
Press [SETUP].
2 Press [A, T] to select "Set Up" and
press [1_].
3 Press [A, _'] to select "Manual Clock
Setting" and press [ENTER].
4
5
6
Press [4, I_] to select the item you
want to change and press [A, _'] to
change the setting.
Press [ENTER].
The clock starts.
Press [SETUP].
eDST (Daylight Saving Time): ON or OFF
If you select "ON", the clock is advanced one hour starting at 2
a.m. on the first Sunday in April and ending at 2 a.m. on the last
Sunday in October.
eTIME ZONE shows the time difference from Greenwich
meantime (GMT).
EST (Eastern Standard Time) - GMT 5
CST (Central Standard Time) - GMT 6
MST (Mountain Standard Time) - GMT 7
PST (Pacific Standard Time) - GMT 8
AST (Alaska Standard Time) - GMT 9
HST (Hawaii Standard Time) - GMT 10
In the United States, TV GUIDE and other related marks are
registered marks of Gemstar-TV Guide International, inc. and/
or one of its affiliates, in Canada, TV GUIDE is a registered
mark of Transcontinental Inc., and is used under license by
Gemstar-TV Guide international, Inc. TV Guide On Screen,
G-LINK, VCR Plus+ and PlusCode are registered marks of
Gemstar-TV Guide international and/or one of its affiliates.
The TV Guide On Screen and VCR Plus-}- systems are
manufactured under license from Gemstar-TV Guide
International, Inc. and/or one of its affiliates.
GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/
OR ITS RELATED AFFILIATES ARE NOT IN ANY WAY
LIABLE FOB THE ACCURACY OF THE PROGRAM
SCHEDULE INFORMATION PROVIDED BY THE TV
GUIDE ON SCREEN SYSTEM. IN NO EVENT SHALL
GEMSTAB-TV GUIDE INTERNATIONAL, INC. AND/
OR ITS RELATED AFFILIATES BE LIABLE FOR ANY
AMOUNTS REPRESENTING LOSS OF PROFITS,
LOSS OF BUSINESS, OR INDIRECT, SPECIAL, OR
CONSEQUENTIAL DAMAGES IN CONNECTION
WITH THE PROVISION OR USE OF ANY
INFORMATION, EQUIPMENT, OR SERVICES
RELATING TO THE TV GUIDE ON SCREEN SYSTEM.
The TV Guide On Screen and VCR Plus-}- systems are
protected by one or more issued United States patents such as
6,331,877; 6,239,794; 6,154,203; 5,940,073; 4,908,713;
4,751,578; 4,706,121; 6,466,734; 6,430,359; 6,091,882;
6,049,652; 5,335,079; 5,307,173.