Table of Contents
Advertisement
Upgrading the System Software
Upgrading the System Software
Upgrade System Software
To upgrade system software from a CompactFlash card:
1.
Remove the IntraMail CompactFlash card (if installed), then insert the CompactFlash card containing the
system software into the Main Equipment Cabinet.
- Although advisable, backing up the site programming is not required.
Press and hold the Reset Switch on the cabinet.
2.
3.
When the LED on the cabinet goes out, release the Reset Switch .
- The LED initially lights green, yellow, and then blue. During the software load, the LED alternately
- The software takes about seven minutes to load.
- The system restarts after the load completes with all the initial site programming intact.
4.
Once the system restarts:
- Remove the software upgrade CompactFlash card.
- Insert the IntraMail CompactFlash card.
- Reset the system.
Figure 28: Loading System Software from a CompactFlash Card
46 ◆ Installation
lights blue and flashes green.
1
2
DSX-40 Hardware Manual
Hide quick links:
Advertisement
Table of Contents
