Miele ESW4720 Operating Instructions Manual page 30

Installation
Integrated installations
Models 4700 FB and 4800 FB
Custom made front panels can be
installed with models 4700 FB and
4800 FB.
Pane[ dimensions
4700 FB
Width 27 :s/s"(695 mm)
Height 11" (279 mm)
4800 FB
Width 29 1"_/16" (757mm)
Height 11" (279 mm)
The custom panel must be atleast "_/"
J8
(!0 mm) thick and made of heat resist-
ant material 140 °F (60 °C).
'_ Insta!l a handle to the custom front
panel using counter sunk screws.
,'_ Remove the drawer from the casing.
See "Removing the drawer".
The panel attached to the warming
drawer front can be used as the drilling
template for the custom panel.
_@Loosen the two screws on the inner
side of the drawer and remove the
panel from the appliance fronL
,'@Place the panel on a firm surface
with the adhesive tape facing up.
Pee! the backing from the adhesive
tape.
{:¢ Position the custom panel over the
removed panel using the tape to hold
it in place.
3O