NEC Storage Performance Monitor/Optimizer User Manual page 139

Appendix A Commands of Performance Monitoring/Optimization Function
mm
dd
hh
mm
-to Time
Specify the end time of extraction to extract statistic information by specifying a period. The
method and interpretation of time are the same as the -from option.
-hp Host Port (Port in Host Director)
Specified if you want to extract statistic information of the specified host port. For this option,
specify the host port number or the range of host port numbers. Up to 10 host ports can be
specified. To specify multiple host ports, separate them by spaces. You can omit the
identification number. In this case, statistic information for all host ports is extracted.
A host port number is expressed by linking a director number (in hexadecimal) and port number
(in hexadecimal) by a hyphen.
Director Number - Port Number
You can use "%" only if you specify a host port number. In this case, statistic information of all
ports with the specified director number is extracted.
Director Number - %
When you specify a range of host port numbers, link the host port numbers by colons. If you
specify a range, statistic information of all host ports in the range is extracted.
Director Number - Port Number: Director Number - Port Number
-dp Disk Port(Port in Disk Director)
Specified if you want to extract statistic information of the specified disk port. The format and
method of specification are the same as a host port.
-ld Logical Disk
Specified if you want to extract statistic information of the specified logical disk. For the
identification number, specify the logical disk number (in hexadecimal) or the range of logical
disk numbers. Up to 10 logical disks can be specified. To specify multiple logical disks,
separate them by spaces. You can omit the logical disk number. In this case, statistic
information for all logical disks is extracted. When you specify a range of logical disk numbers,
link the logical disk numbers by colons. If you specify a range, statistic information of all logical
disks in the range is extracted.
Logical Disk Number: Logical Disk Number
- Month [01-12]
- Day (in one month)[01-31]
- Hour (in 24-hour time)[00-23]
- Minute [00-59]
10