Terminal - Nokia 9000i communicator User Manual

7-18

Terminal

The Terminal application is activated in the Inter-
net main view by selecting Terminal and pressing
Select. The Terminal application is used to con-
nect directly (not via Internet) to a remote com-
puter by way of a data call.
The Terminal main view shows defined Terminal
connections. The Terminal application is similar
to the Telnet application, in that both applica-
tions emulate the VT100 terminal display (see
figure 7-8). The display occupies the left side of
Defining Terminal connections
After you have pressed Define in the Terminal
main view, the defined Terminal connections are
shown.
To edit existing connections, press Edit.
To define new Terminal connections, press New.
To delete the selected connection, press Delete.
Pressing Edit or New opens the Define Terminal
connection view (figure 7-9):
Connection name — Edit an existing or enter a
new connection name. The name can be defined
freely.
1998 Nokia Mobile Phones. All Rights Reserved.
Defining Terminal connections
the screen. The screen size is 80 characters in 24
lines.
Selecting the host and the connection initiation
procedures are done in the same way as with Tel-
net connections. To connect with the selected
pre-defined Terminal connection, press Connect.
See "Defining Terminal connections: Terminal
connection" on page 7-19.
To create new or edit existing connections, press
Define. See "Defining Terminal connections" on
page 7-18.
Phone number — The phone number for accessing
the service. The phone number may include spac-
es and hyphens.
Data bits — Service/host specific communication
parameter: 7/8 (default).
Parity — Service/host specific communication
parameter: None (default)/Odd/Even.
Stop bits — Service/host specific communication
parameter: 1 (default)/2.
Local echo — Controls whether characters typed
from the communicator keyboard are echoed to
the communicator interface display (i.e., locally)
or to the remote host computer: On (echoed lo-
cally)/Off (echoed to the remote host – default).
Figure 7-9