Panasonic AF-FX100 Setup Instructions page 66

Variable name
13 IPADDR_AVMDINFO_
2
ON*
14 IPADDR_OSD_ON *
15 AlarmAutoDeactivate
16 SyslogLevel
*1 DG-ND400 is equipped with a function to transfer an alarm. Take note of multiplex transmission.
*2 Through image display is performed for a device that is not set to either of IPADDR_AVMDINFO_ON or
IPADDR_OSD_ON.
*3 Through image display is performed for a device that is not set to either of IPADDR_AVMDINFO_ON or
IPADDR_OSD_ON.
Message
IP address* of feature
extraction pc (eight or
less IP addresses can be
set).
Pv4 address(decimal)
3
IP address* of NDR
(eight or less IP
addresses can be set).
IPv4 address(decimal)
use alarm auto deacti-
vate.
0:Auto,1:Manual
syslog output level.
Settings Description
Optional This is the IP address of
DG-ND400 or the IP address of
DG-ASM100 with which you like
to display the image data of
"Distribution of image with pro-
cessing results 2 (detection
frame information in the JPEG
header of input image)". Up to 8
IP addresses can be registered.
Unless otherwise specified, leave
this blank.
E.g.: 192.168.10.31
Optional This is the IP address of the PC
software package with which you
like to display the image data of
"Distribution of image with pro-
cessing results 1 (OSD image)",
DG-ASM100, DG-ND400,
encoder, or the like. Up to 8 IP
addresses can be registered.
Unless otherwise specified, leave
this blank.
E.g.: 192.168.10.32
Mandatory This holds the alarm status in the
BOX and decides whether or not
to newly perform detection. "0"
for automatic cancellation, "1" for
retainment.
"1" for linkage with the PC soft-
ware package, "0" for other
cases.
E.g: 1
Fixed This is for setting of the output
level of syslog. "INFO" fixed.
Setting value: INFO
66