Table of Contents
Advertisement
How to specify [Bottom] of "Specification of Human Size"
Step 1
Select the [Bottom] position of "Specification of
Human Size".
Step 2
After left-clicking a point on the human size display
area, select a rectangular area by dragging.
After selecting a rectangular area, right-click the area
to display the previous settings.
Resetting can also be performed by left-clicking and
dragging again.
Lower selected rectangular
area of the screen
STEP1
Step 3
Click the [Decision] button to check the selected rect-
angular area.
→ The setting values take effect "H", "V", "x", and
→
"y" in the "Specification of Human Size" field.
Lower selected area
of the screen
49
Advertisement
Table of Contents
