KitchenAid KERC507 Use And Care Manual page 56

oubleshooting
This section is designed to help you save the cost of a service call. It outlines possible
problems, their causes, and actions you can take to solve each problem. If you still need
assistance or service, call our Consumer Assistance Center (in the U.S.A., see page 59; in
Canada, see page 60) for help or calling for service. Please provide a detailed description of
the problem, your appliance's complete model and serial numbers, and the purchase or
installation date. (See the "A Note to You" section.) This information will help us respond
properly to your request.
PROBLEM
Nothing will
operate
The oven will
not operate
The surface
units will not
operate
The control
knob(s) will
not turn
The Self-
Cleaning
cycle will not
operate
POSSIBLE CAUSE WHAT TO DO
The unit is not wired into
a live circuit with proper
voltage.
A household fuse has blown
or a circuit breaker has
tripped.
Wire the unit into a live circuit with
proper voltage. (See Installation
Instructions.)
Replace household fuse or reset
circuit breaker.
You have not set the elec-
tronic control correctly.
You have programmed a
delayed start time.
Refer to the section in this manual
describing the function you are
operating.
Wait for the start time to be reached
or cancel and reset the controls.
A household fuse has blown
or a circuit breaker has
tripped.
You have not set the control
knobs correctly.
You are not pushing in
before turning.
Replace household fuse or reset
circuit breaker.
Push control knobs in before turning
to a setting.
Push control knob(s) in before
turning to a setting.
You have programmed a
delayed start time.
Wait for the start time to be reached
or cancel and reset the controls.
56