Kenmore 100.06912 Use & Care Manual page 7

CHOPPING
cont.
NOTE: Before opening the Bowl Cover Assembly, Press the OFF Button and unplug
the cord.
8..To remove bowl cover, unlock by turning clockwise until cover unlatches, and lift off.
9. Lift the chopping blade by its bose and remove. Unlock the Bowl by turning it clockwise,
"( see Assembly on pages 4 and 5 ), and lift off. Empty the processed food.
V_lARNING'Multipurpose/Chopping Blade is very sharp Use caution
when handling.
1
TO SLICE OR SHRED:
_ CAUTION:
Make sure the unit is unplugged before use: Never use t
your hand to pushfood tnto processor. The use of heavy pressurewill
1
not speed operation. :....
I. Lock the Bowl onto the Base as described in Assembly.
2. Slide the disc Stem down onto the center post of the base, then place the slice/shred
discs, with the desired side facing up for either slicing or shredding, onto the disc stem
and push down. At this point the disc will be at the top at the bowl.
_ ARNING:
Slicing!ShreddingDiscsare very sharp. Usecautionwhen
handling,"
3. Lock the Food Pusheronto the food chute. At this point, the movable loop works as part
of the food pusher.
Lock the Bowl Cover Assembly onto the Bowl. Put the big food pusher into place and lock.
4. Fill the food chute with pieces of food such as potato, cabbage, green pepper, whole
tomato, etc., See the Shredding or Slicing Guide for sizes of ]bad pieces.
5. Put the small foodpusher into place. Plug the power cord into electric outlet. Blue
OFF light should illuminate to show that the food processor is properly
assembled and ready to operate.