Kenmore 100.06912 Use & Care Manual page 6

CONTROLS
When the processor is plugged in and the base, bowl and cover assembly is correctly connected
and locked into place, the OFF button is iJluminated blue to show that the unit is connected to a
power source and ready to operate. If the OFF button is not glowing blue, the howl and cover are
not locked together correctly.
PULSE: When the PULSEbutton is pushed and held, it illuminates blue and ihe Food
Processor operates. As soon as you let go of the button, the Processor shuts off and the
PULSE button light goes out. Use PULSE for shodt processing tasks, such as chopping nuts,
raw meats or vegetables. This allows you much greater control of the consistency Of what
you are processing.
ON: When the ON button is pushed, it ilfuminates blue and the unit will run continuously,
The processor wi!l stay on until you push the OFF button. This is good for less tender food
and items that take a while longer to process.
CHOPPING:
1. Lock the Bow] onto the Base as described in Assembly.
2. Place the Multipurpose/Chopping Blade onto the
Center Post (see Fig. 4).
CAUTION: Blades shredding discs and the small
spatula slicing/shredding ,which are sharp,
Handle carefully.
1
3. Place food to be chopped into Bowl. Refer to Chopping
Guide to prepare food for chopping,
4. Lock Bowl Cover Assembly onto Bowl, as described in
Assembly.
5. Put the big food pusher into place and lock, and put the
small food pusher into place.
6. Plug the cord into an electric outlet.
The OFF button illuminates if base, bowl, and cover assembly are all locked into place.
7, Pushthe ON button to run constantly, or for better control over consistency, push end
hold PULSE button.
8, When finished processing;
if Pulsing, stop pressing button and unit automatically stops.
If you turned processor to ON, push the OFF button to stop.
Atlow the multipurpose/chopping blade to stop rotating.
6