Advertisement
Available languages
Available languages
HI
FAN
LO
MGHT
Fan
The 3-position rocker switch (on the left) controls the fan. The
left position
is high speed, center position is off, and right
position is low speed.
Light
The 2-position rocker switch (on the right) controls the lights.
The left position is on and the right position is off.
A
WARNING: To reduce the risk of electric shock,
disconnect
from power supply before cJean-
rag.
ABuminum mesh filter
Clean frequently using hot water and a mild detergent or in
your dishwasher. The aluminum mesh filter should be washed
approximately
every month depending
on the amount of us-
age. Wash more often if your cooking style generates greater
grease - like frying foods or wok cooking.
Nonoducted filter (CmeanCooking
hoods onmy)
(available separately - see page 4)
Clean filter surfaces frequently with a damp cloth and a mild
detergent.
DO NOT immerse filter in water or put in dish-
washer. The special "Clean Sense" feature indicates when the
filter is to be replaced. The blue and yel!ow strips will blend to
green when it is time to change the filter. The "Clean Sense"
feature works best when facing toward the cooking surface.
Painted hood surfaces
Wiping regularly with mild soap/detergent
and warm water
should protect painted hood surfaces. Be cautious about us-
ing "New and Improved"
cleaning agents. Your hood is in-
stalled over hot cooking equipment.
Most chemicals found in
cleaning agents react with heat to loosen paint.
Stainless
steeB hood surfaces
Stainless steel hoods should be washed regularly with a clean
cloth, warm water and mild soap or dish detergent. Clean in
the direction of the polish lines. Rinse well with clear water
and wipe dry immediately. You may wish to apply light oil used
for furniture polishing to emphasize it's bright finish.
Fan assembBy
Fan blade can be cleaned with a damp cloth and mild deter-
gent. Use care when cleaning fan blade - it must not become
bent or misaligned.
DO NOTALLOW WATER TO ENTER MO-
TOR. Make sure all surfaces are completely
dry before re-
installing filters and restoring power.
Motor is permanently
lubricated.
Do not oil or disassemble
motor.
O_
2
3
Advertisement
