Troubleshooting; Exit; Display; Freeze - JVC AV-27D500 User Manual

BUTTON FUNC
ON/tiOV£ (Picture in Pinture)
PIP allowsyou to wewtwopictures
simuitanecus/y
i_ (PIP) ON/IVfoVE
m
I_ EXiT to turn PiP off
Note: The PIP channel and mai_
screen channel will appear in the
display rnon_ntarily right after you turn
on PiP. You can teave them up
permanently by pressing DISPL_,y until
you reach the mode.
Note: The PIP Screen is 1/9 of the
regular screen size.
Once PiP is turned on, the ON/IVIOV_E
button operates the Move feature.
You can move the PIP window to any of
the TV's four corners.
Note: Each press of the On/MovE
button will shiftthe PIP window one
position.
Note: When the PIP screen has no
signal, the PIP window will be blue.
TIONS
FREEZE
Youcan freeze the picture in _e main
screen into the PIP windo_
_) FREEZE
Note: When the PIP is off. pressing
FREEZE takes a snapshot of the main
screen and puts it into the PiP
window.., great for catching those mail
order addresses.
Note: When the PIP is on FPJEF1E stops
the PIP picture.
SWAP
YGucan swap the P/P picture and the
main picture.
_ SWAP
CHANNEL 4+ For PIP
Change the channel in the PIP _findo_
CH4+
I_UmCE
You can select the source for the PIP
windo_
Nots: When you connect the
component input (OVD) to V-2, the PIP
window will be blue.
TROUBLESHOOTING
No power
No pictureor sound
Remote controlis
notoperating
You caNrlotsaiect a
certefn channel
Powertomsoff
The clock is wrong
I|
Poorcolorquality
Lines or streaks
acro_ the 8creell
Spotted pleture
Double picture
(Ghosts)
Snowy pleture/
Image noise
Screen is 8G% bisck
• See if the power cord became unplugged,
• Perhaps you have experienced a blown cimuit breaker or fuse or a power outage
• The antenna could be disconnected.
• The input mode _ or video) could not be set properly, refer to page 27.
• The tuner mode (in the menu selection) could be set improperly, refer to page 15
• The staiton may be having dif_cul_es, check to see if other channels are operating normally.
• Check that the batteries are still wothJng and properly installed.
• Make sure there are no objects blocking a clear path from the remote to the _L
• Check that the 2-way mode sefecto_"switch is in the proper pesitto_ -- 8st to TV to view televis_n
• Maybe you are too te," from the TV. you must be within 23 feet (or 7 n_ters).
• Make sure the channels a_e progran',m_d. See Channel Summary, page 17.
• Perhaps _e channel is locked, select it with Ihe 10 key pad and futlew les_uctions.
• Perhaps the Or_ Timer is set, press the power button, check page 24
• The power was ir,te_lJpted or Ibe _ cord unplugged.
* 33".eSleep Timer rnay pe seL see page Z6.
• The clock needs to be reset. See page 16.
lih i
• Tint a_l cefo_ may be Improderly adjusted, Check pege 22.
• _peo Status mode may be set to an inappropriate setting. Check page 22
• There cOUld be interference from another energy consuming appliance, such as a computer,
another TV or VCR. Move any other such appJlenees ter ther away fr(Jcn the TV.
• Ti_ere could be intederence 5ore a running high wattage appliance such as a hair_ryer, vacuum
Gisane_ or nectl sig_. You will have to move the anterma away from the source of the interfer-
ence or change it to a coaxial cable which is less prone to inledarence.
• A building or akplane can reflect the original signal producing a sec_d, delayed one. Adjust
the antenna position,
• The antenna may be damaged, dilated or turned, Check the antenna connection.
pages 6 to 7. It it is dan_ged, you will have to replace it.
• Ctoc_d Caption Text Mode is on.
1"
B_q_JaJ (x slemo • Make sure 6_e MTS mode is properly set. Refer to page 23 for details on setting MTS Modes.
I:_rjans cant ke hm=d
No sound from TV * TV Speakers may be turned off in the menu. see page 25.
speakers at all
I'i'llli ........ I'liln[
Stotic ai_icify • It is nofmef to toef a surge of stegc aleci_'icity if you brL,sh over or touch the screen.
Occa.s_n_ • It Js normal th_ the ]_' to emit crackling sounds whefl turned on or off Unless the soond or
c_ackJing sounds picture become abi!orma[, this is fine,