GE Profile SmartDispense SPBD880 Installation And Owner's Manual page 7

Pedestals
Hide thumbs Also See for Profile SmartDispense SPBD880:
Table of Contents

Advertisement

Available languages

Available languages

! i i iiii
ii !i i iiii
i!i i i !ii
!ii
The Instruction
Panel
Pressthe tabs on the sides of the instruction
panel. Slowly rotate the instruction panel
toward gou until it stops. Finally,slide the panel
down in front of the tanks into the slot
available.
After adding laundrg product, lift the panel
out of its resting position;then rotate the panel
closed until it snaps into its horizontal position.
NOTE: The drawer will not fullg close
if the panel is in its open position.
ge.com
The Detergent
Tanks
To remove either of the two outer tanks,
grasp the sensor at the rear of the tank, using
the grip provided, and pull the sensor straight
up. Loosen the supplg tube bg rotating
1/4 turn the tube and fitting until the tube
can be pulled straight up.
Eachtank can hold 350 ounces of liquid
HE(High Efficiencg)laundry detergent-
approximatelg 100 washes of regular
concentration detergent. The sgstem
requires that at least 100 ounces of new
detergent must be added to the tank
to recognize that it has been filled.
• Detergent is pumped to the washer
at the beginning of the wash cgcle.
• Do not put any other substance
into the tanks besides liquid
HE(High Efficiencg)detergent.
• Do not fill the tank while it is removed from
the drawer.
• The SmartDispense'" sgstem determines
how much detergent to supplg to the
washer, depending on the load size,
soil level and water hardness.
• Do not dilute with water.
NOTE: Use only
HE (High
Efficiencg)
detergent.
The Fabric Softener Tank
To remove the center tank, grasp the sensor
at the rear of the tank, using the grip provided,
and pull the sensor straight up. Loosenthe
supplg tube bLtrotating 1/4 turn the tube and
fitting until the tube can be pulled straight up.
Removethe tank bg tilting slightlg toward the
washer and pulling straight up.
• Eachtank can hold 95 ounces of
concentrated liquid fabric softener, enough
for approximatelg 75 loads of concentrated
liquid fabric softener.
• Do not dilute with water.
• If desired, concentrated liquid fabric softener
is pumped to the washer at the correct time
in the wash cgcle.
• Do not put any other substance into the tank
besides concentrated liquid fabric softener.
• The SmartDispense'" sgstem determines
how much softener to supplg to the washer,
depending on user inputs for the wash CLlcle.
NOTE: Use only concentrated
liquid fabric
softener.
7

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents