Installation
Instructions
Instructions
en franqais
: ................
4
Instrucciones
en espa5ol:
...............
8
Pedestal
Models
White
Pedestal
SPSD157JWW
Metallic
Gold SPSD157JMG
Metallic
Vermillion
SPSDI57JMV
For Washer
Model:
WPDH8800
For Drger
Models:
DPVH880EJ,
DPVH8800GJ
BEFORE YOU BEGIN
Read these instructions
completelg
and cerefullg.
• IM PORTANT - Save t hese i nstructions
for local inspector's
use.
• IMPORTANT-Observe
all
governing
codes and ordinances.
• Note to Consumer
- Keep these instructions
with gour Owner's Manual for future reference.
• Completion
time - i to 2 hours
• Proper installation
is the responsibilitg
of the installer.
• Product failure due to improper
installation
is not
covered under the Warrantg.
_, CAUTION - Due tothesize a nd
weight
of these products, and to reduce the risk of
personal injury or damage to the product, TWO
PEOPLE ARE REQUIRED FOR PROPER INSTALLATION.
• See washer and drger installation instructions for
additional installation requirements and guidelines.
TOOLS YOU WILL NEED
Phillips H ead
Screwdriver
9/16" Open End Wrench
or Adjustable Wrench
8 mm Socket Wrench
INSTALLATION
PREPARATION
Remove the packaging.
The Drawer divider is taped at the top of the
shipping carton. Remove the divider and set aside
for final installation.
Flatten the product carton to use as a pad
to lag the washer or drger down on its side.
Continue using the carton to protect the finished floor
in front of the installation
location.
KIT CONTENTS
4 Support Pads
4 Mounting Screws
Drawer Divider
[]
REMOVE THE LEVELING LEGS
[]
Carefullg lag the washer or drger on its side
to access the leveling legs on the bottom
of the appliance.
IMPORTANT: Do not leg the washer or drger
on its back! Do not remove the shipping
bolts
on the back side of the washer. The bolts must
remain in place until the washer is returned
to on upright
position.
[]
Use an open-end
wrench to remove the
washer or drger leveling legs.
1