Advertisement
ENGLISH
Using the Dolby Digital mode
Play a pre-recorded source (DVD) with the
1
Press the DVD button.
DVD
FUNCTION
2
Select the DIGITAL input mode.
INPUT MODE
3
Set the DOLBY surround mode.
DOLBY/DTS
SURROUND
SURR.MODE
4
Start playback on the selected component.
For operating instructions, refer to the
various components' manuals.
• The PRO LOGIC indicator lights when a
2-channel Dolby Digital signal is input.
5
Adjust the MASTER VOLUME control.
MAIN VOLUME
MASTER
VOL
6
CD
Set the slide switch to "CD" or "MD".
MD
DVD
TAPE
VCR
7
Set the surround parameter according to the source and adjust the tone.
First press the SURROUND button.
SURROUND
Then press the NEXT button to switch to the various settings as follows.
NEXT
16
mark.
1
5
-
+
DOLBY
D I G I TA L
-
+
3
2
CD
MD
DVD
6
POWER
TAPE
VCR
HTA
TV
VCR
DVD
MD/
PRESET
MD/TAPE
FUNCTION
TAPE MON
1
TAPE / VCR
GROUP
A/B
CHANNEL
CHANNEL
CD/MD/DVD
5
MASTER
DISPLAY
VOL
ENTER
8,9
NEXT
SET UP
7
SYSTEM
SURROUND
AUDIO
TITLE
MENU
TV INPUT
TV
CHANNEL
VOLUME
T.TONE
SURR.MODE
MUTING
VIDEO SELECT
3
8
Use the
(up) and
Press the SURROUND button to finish the setting.
SURROUND
Press the NEXT button to switch to the default setting.
NEXT
9
To reset the settings to the factory defaults, use the
buttons to display "Yes", then press the SURROUND button twice.
The settings are entered and the surround parameter setting mode is finished.
Press the SURROUND button to finish the setting.
SURROUND
Press the NEXT button to switch to the D. COMP. setting.
NEXT
2 Surround Parameters
D.COMP. (Dynamic Range Compression):
Motion picture soundtracks have tremendous dynamic range (the contrast between very soft and very loud
sounds). For listening late at night, or whenever the maximum sound level is lower than usual, the Dynamic
Range Compression allows you to hear all of the sounds in the soundtrack (but with reduced dynamic range).
(This only works when playing program sources recorded in Dolby Digital) Select one of the four parameters
("OFF", "LOW", "MID" (middle) or "HI" (high)). Set to OFF for normal listening.
NOTE:
• When playing back in the Dolby Pro Logic mode, depending on the settings of each output channel, it may
not be possible to make a setting of the master volume that exceeds 3dB.
(down) buttons to set the D. Comp.
(up) button
(down) button
(up) and
(down)
(up) button
(down) button
Advertisement
