Advertisement
Available languages
Available languages
I WARNING
I
If an extension cord is necessary, s cord with adequate size
conductors that is capable of carrying the current necessary for your tool must be used.
This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must
use 3-wire extension cords that have 3-prong plugs and receptacles.
NOTE: The smaller the gauge number, the heavier the cord.
RECOMMENDED SIZES OF EXTENSION CORDS
120 VOLT ALTERNATING
CURRENT TOOLS
Tool's
Ampere
Rating
3-6
6-8
8-10
10-12
12-16
Cord Size in A.W.G.
Wire Sizes in mm=
Cord Length in Feet
25
50
100 150
18
16
16
14
18
16
14
12
18
16
14
12
16
16
14
12
14
12
Cord Length In Meters
15
38
60
120
,75
,75
1.5
2.5
.75 1.0
2.5
4.0
.75 1.0
2.5
4,0
1.0 2,5
4.0
- SAVE THESE INSTRUCTIONS-
(_
his symbol designates that
this tool is listed by
Underwriters Laboratories.
This symbol designates that this
_|
I_1_ ) tool is listed to Canadian Standards
"_'
by Underwriters Laboratories.
This symbol designates
that this tool is listed
by the Canadian
Standards Association.
This symbol designates that this
tool is listed by Underwriters
Laboratories, and listed to
Canadian Standards by
Underwriters Laboratories.
This symbol designates
that this too! is a
recognized component by
Underwriters Laboratories.
n
UOH-@
This symbol designates
that this tool complies to
NOM Mexican Standards.
c us
This symbol designates that this
tool is a recognized component
by Underwriters Laboratories,
and recognized to Canadian
Standards by Underwriters
Laboratories.
6
Advertisement
