Advertisement
Available languages
Available languages
GENERAL
SAFETY
RULES
,_
WARNING:
Read and understand
all instructions.
Failure to follow all
instructions
in this Operator's
Manual may result in electric shock, fire, and/or
serious personal injury.
Save all warnings
and instructions
for future
reference.
READ AND SAVE THESE INSTRUCTIONS
,_
CAUTION:
Do not modify or use this stand for any application
other than
that for which it was designed.
ELECTRICAL SAFETY
=
Power tool plugs must match
the outlet. Never modify the plug in any
way. Do not use any adapter
plugs with grounded
power tools. Unmodified
plugs and matching
outlets will reduce the risk of electric shock.
=
Avoid
body contact
with grounded
surfaces,
such as pipes, radiators,
ranges,
and refrigerators.
There is an increased
risk of electric shock if
your body is grounded.
=
Do not expose
power tools
to rain or wet conditions.
Water entering a
power tool will increase the risk of electric
shock.
=
Do not abuse
the cord.
Never use the cord for carrying,
pulling,
or
unplugging
the power tool. Keep the cord away from heat, oil, sharp
edges, or moving
parts.
Damaged
or entangled
cords
increase
the risk of
electric
shock.
When operating
a power tool outdoors,
use an extension
cord suitable
for outdoor
use. Use of a cord suitable
for outdoor
use reduces
the risk of
electric shock.
if operating
a power tool in a damp
location is unavoidable,
use a
ground
fault circuit
interrupter
(GFCl} protected
supply.
Use of a GFCI
reduces the risk of electric shock.
SAFETY
FOR WORK STAND
=
Know your stand.
Do not attempt
to assemble
or operate your miter saw
stand until you have read the safety instructions
in this section.
=
Only use your miter saw stand on a hard, dry and flat surface.
=
Keep your work area clean and weU lit. Cluttered or dark areas invite accidents.
=
Do not overreach.
Keep proper footing and balance at all times.
=
Do not load the miter saw stand with more than 330 Ibs.
Page 6
16490
ManuaLRevised_12
0604
Advertisement
