Craftsman 486.24320 Owner's Manual page 7

STEP 9: (SEE FIGURE 9)
. Align the holes in the handle with the holes in the
bottom of the poly tray, the latch stand plate and the
latch stand bracket. Fasten together using four 1/4"
x 1o3/4" hex bolts (D), 1/4" flat washers (I) and 1/4"
nylock nuts (J). Tighten.
At this time tighten all bolts which were left loose.
WASHER
(D) 1/4" × 1-3/4"
HEX BOLT
FIGURE 9
CART WiTH TONGUE ARRANGED FOR TOWING
(N) 3/8" x 1" /
CLEVIS PIN
/
(G) 3/8" x 4"
CLEVIS PiN
LATCH LOCK
FRONT
TONGUE
FIGURE 10
STEP 10: (SEE FIGURE 11)
Assemble the hitch pin (Q) through the tongue and
hitch bracket and secure it with the 1/8" hairpin cotter
(M),
(Q) HITCH PiN
HITCH
BRACKET
FIGURE 11