_, WARNING:Battery toolsarealways inoperating
condition. T herefore, switchshouldalways belocked
whennot inuseor carrying atyourside.
TO iNSTALLBLADES
See Figure 4.
[]
Remove battery pack, See Figure 3.
[]
Lift blade clamp lock / release }ever located on front of
saw.
[]
Insert saw blade between blade clamp and saw bar,
[]
Release and !ock blade clamp }ever,
[]
Replace battery pack,
HEX KEY STORAGE
See Figure 5.
[]
Secure supplied hex key on the saw base behind the
rubber covered tab, Push into place,
[]
Make sure the hex key is secured before performing
any sawing operation,
[]
Remove by pulling on the hex key,
BLADECLAMP
LOCK/ RELEASELEVER
SAW BLADE
UFT
BLADECLAMP
BLADECLAMP
Fig. 4
HEX KEY,
HE× KEY
STORAGE AREA
Fig. 5
12