Recorder - Nokia 610 User Manual

You can use a shortcut to access the list of voice commands
direct from the standby display:
Press and scroll left with
a
You can now view the list of
a
Follow the instructions shown on the display.
a
Executing a voice command
When an application using the GPRS connection is sending
x
or receiving data, you cannot execute a voice command. To
do so, you must first end the application using the GPRS
connection.
To execute a voice command,
Press .
a
The message Speak now
Say the voice command loudly and clearly.
a
Your car kit phone will play back the voice command and
automatically perform the function assigned to it 1.5 seconds
later.
.
Voice commands.
will appear on the display.

Recorder

The tape recorder feature allows you to
record pieces of speech, sounds or an
active phone call. This is especially useful
if you need to note information during a
call: for example, you can record a name or a number to be
written down later.
Obey all local laws governing recording of calls. Do not use
x
this feature illegally.
You can make up to 10 recordings as long as you do not exceed
an overall recording time of five minutes. Each recording is
saved together with the running number, the length and time of
the call.
New recordings are automatically saved in the memory. When
the memory is full, the message
shown on the display. To be able to make new tape recordings,
you will first have to erase some old ones.
Press and hold to begin recording during a phone call.
a
Copyright
Recorder
No memory to save rec. will be
©
2004 Nokia. All rights reserved.
49