25. Smooth down the TOP FLEX ASSEMBLY evenly.
27. Now close the flex connector of the LCD.
29. Align the LCD to the top guiding pins. Fit the CMOS CAMERA
MODULE part as shown before.
31. Click both clips into their places.
Page
2
(25)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
26. Insert the metal tweezers under the flex foil as shown.
28. If these assembly wasn't separated before, insert the whole
assembly into the A-COVER.
30. Insert the TOP KEYMAT SUPPORT, beginning from the top.
32. Shift open the SLIDE MODULE ASSEMBLY partly...
6500 Slide RM-240
Service Manual Level &2
ISSUE