25. Repeat this procedure on opposite side.
27. Carefully lever up the edges of the BOTTOM FLEX...
29. Remove the BOTTOM FLEX.
31. Unscrew these screws in the shown order.
Page
3
(25)
CONFIDENTIAL
Copyright © 2007 NOKIA. All rights reserved.
26. Now the BOTTOM KEYMAT can be removed.
28. ...on both sides.
30. Keep this adhesive clean if this part should be reused.
Remove all adhesive residues from the SLIDE MODULE ASSY.
32. Discard these screws. Do not use them again.
6500 Slide RM-240
Service Manual Level &2
ISSUE