Hitachi XP P9500 User Manual page 121

Items displayed by the dlnkmgr view
-lu -item command
ChaPort
CLPR
Type
IO-Count
IO-Errors
DNum
IEP
LB
VmPSP
VmRuntimeName
VmState
All items are displayed
In the sub-parameters, -hdev or -pathid, you can filter the LU
information to be displayed. If you omit both parameters, the command
displays the information about all the LUs recognized by HDLM.
For details on the contents of each displayed item, see
Information on page
The sub-parameters are:
-hdev host-device-name
Displays information only for the paths accessing the specified host
device.
The host-device-name string is case-sensitive.
-pathid AutoPATH_ID
Use this parameter to display only the information about the LU that
is connected to the path with that specified AutoPATH_ID.
-t
Omits the title for each information item.
Example:
The following example shows the LU information displayed when
ChaPort, LB, VmPSP, VmRuntimeName, and VmState are specified as
additional display items:
>dlnkmgr view -lu -item cp lb vmpsp vmruntimename vmstate
Product : SANRISE_AMS
SerialNumber : 77010152
LUs : 1
iLU HDevName
VmRuntimeName
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Values specified after the -item
cp
clpr
type
ic
ie
dnu
iep
lb
vmpsp
vmruntimename
vmstate
all
6-42.
LB
ChaPort Status VmState
parameter
Table 6-13 LU
VmPSP PathID
6-41