Hitachi XP P9500 User Manual page 108

Parameter and
program
information to
be displayed
Examples
Example 1
The following example displays configuration information for HDLM
functions on a remote management client:
>dlnkmgr -l view -sys
HDLM Version
Service Pack Version
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>
Example 2
The following example shows how to display information about the HDLM
license:
>dlnkmgr -l view -sys -lic
License Type Expiration
Permanent
KAPL01001-I The HDLM command completed normally. Operation name
= view, completion time = yyyy/mm/dd hh:mm:ss
>
Example 3
The following example shows how to display information about the audit
log settings:
>dlnkmgr -l view -sys -audlog
6-28
Item
Audit Log
Category
-
-
Command Reference
Hitachi Dynamic Link Manager User Guide (for VMware(R))
Description
within the parentheses following on. The
collection level indicates a severity level. A
value from 0 to 7 is displayed as the collection
value.
The categories of audit log data to be output are
displayed. When more than one category is
displayed, commas (,) are used as separators.
ss: StartStop
a: Authentication
ca: ConfigurationAccess
If all the above categories are specified, all is
displayed.
If the collection of audit log data is disabled, a
hyphen (-) is displayed.
: x.x.x-xx
: