Maint; Maint.port.beacon - HP Surestore 64 - Director Switch User Manual

maint

The maint branch of the CLI command tree contains commands that relate to maintenance
activities.
The commands in the maint branch can be used only by the Administrator.
Note that the maint.system.resetConfig command resets all configuration data and non-
volatile settings, including network information, to their default values (factory settings).
Management access may be lost until the network information is restored.

maint.port.beacon

Syntax
beacon portNumber beaconState
Purpose
This command enables or disables port beaconing for a particular port.
Parameters
This command has two required parameters.
portNumber Specifies the port number. Valid values are:
0–63 for the FC-64
beaconState
Specifies whether unit beaconing is enabled. Valid values are
Boolean 1 and 0 may be substituted as values.
Command Examples
Root>
maint port beacon 4 false
Root>
maint port beacon 4 0
64 maint
true false
and .