Config.switch.prefdomainid - HP Surestore 64 - Director Switch User Manual
Command line interface user's guide
Hide thumbs
Also See for Surestore 64 - Director Switch:
- User manual (296 pages) ,
- Planning manual (172 pages) ,
- Installation manual (148 pages)
Table of Contents
Advertisement
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
interopMode
Specifies the interoperability mode. Valid values are
mcdata
open
Command Example
Root>
config switch interopMode open
config.switch.prefDomainId
Syntax
prefDomainId domainId
Purpose
This command sets the preferred domain ID for the switch.
Description
The switch must be set offline before this command is entered.
Parameters
This command has one parameter.
domainId
Specifies the new preferred domain ID value. This parameter must be an
integer in the range 1–31.
40
config
— McDATA Fabric 1.0
— Open Fabric 1.0
mcdata
open
and
:
Advertisement
Table of Contents
