Self-Cleaning - Electrolux Electric Range Use & Care Manual

(Models with exposed lower
...... bake element only)
(For models with an exposed lower bake element ONLY)
The bake element may be tilted up using your hand from
the front of the bake element to clean or remove spills
from oven bottom if needed. Remove the bottom rack
before raising the element. Do not to raise the element
more than 4 or 5 inches from the resting position.
When the self-clean cycle has completed:
1. The time of day will appear in the display window and
the "Clean" and "LOCK" light will continue to glow.
2. Once the oven has cooled down for about i HOUR and
the "LOCK" light has gone out, the oven door can be
opened.
Stopping or interrupting a self-clean cycle
If it becomes necessary to stop or interrupt a self-
cleaning cycle once it has been activated:
1. Press @.
2. Once the oven has cooled down for about i HOUR and
the "LOCK" light has turned off, the oven door can be
opened.
3. Restart the self-clean cycle once all conditions have
been corrected.
Setting a self-clean cycle
Starting a self-clean cycle:
1. Be sure the clock displays the correct time of day.
2. Press _. "---"
appears in the display.
3. Press the _ or V keypad once. "3:00"will appear in
the display indicating that a 3 hour self-clean time is
set. To change to a 2 hour self-clean time press
V keypad (2:00 will appear in the display).
As soon as the controls are set, the motor driven door
lock will begin to close automatically and the "LOCK"
indicator light will flash. DO NOTopen the oven door
while the light is flashing (it takes about 15 seconds for
the oven door to lock).
.
"CLn" will appear in the display during the self-clean
cycle and the "LOCK" light will glow until the self-
cleaning cycle is complete or cancelled and the oven
temperature has cooled.
• To avoid possible burns use care when opening the
oven door after the self-cleaning cycle. Stand to the
side of the oven when opening the door to allow hot
air or steam to escape.
DO NOT force the oven door open. This can damage
the automatic door locking system. Use caution and
avoid possible burns when opening the door after the
self-cleaning cycle has completed. The oven may still
be VERY HOT.
Whenever the self-clean feature is active you may
check the amount of time remaining in the self-clean
cycle by pressing the (_
keypad. Remember the
range door cannot be opened until the range has
cooled sufficiently. You will need to add about 1
hour to the remaining time displayed before you can
use the range for cooking.
• When the oven is cool, wipe away any residue or
powdered ash with a damp cloth or paper towel.