Nw Setup - Sharp AR-PB2 Supplemental Manual

Printer expansion kit

Hide thumbs Also See for AR-PB2:

Table of Contents

NW Setup

If the printer is used in NetWare environment, the NW Setup allows easy connection setup.

Outline of the NW Setup

The NW Setup is a setup tool for using a SHARP printer with a network card installed in a Novell

NetWare environment. Registration of printers to a NetWare server and parameter settings for a

network card can be performed by using a procedure with wizards.

For using the NW Setup, a Novell Client supplied by Novell must have been installed. Also before

starting the NW Setup, you must log in the NetWare server with the 'Administrator' privileges.

Checking the hardware and software requirements

To use the NW Setup, the following hardware and software are needed.

NetWare server: IntranetWare (NetWare 4.x)

NetWare client: Novell Client 4.5 for Windows NT

Novell Client v3.0 for Windows 95/98

Client PC operating system: Windows 95, Windows 98, Windows NT 4.0

Printer: SHARP printer with a Print Server Card (AR-NC1D or AR-NC3D) installed

Table of Contents