Receiving Faxes; Selecting The Reception Mode - Sharp AM-400 Online Manual

4. Receiving Faxes

Selecting the Reception Mode

The machine has two modes for receiving faxes:
FAX ONLY mode:
Select this mode when you only want to receive faxes on the line connected to
the machine. The machine will automatically answer all calls on one ring and
receive incoming faxes. ("FAX" will appear in the fax mode display.)
EXT. TEL mode:
Select this mode when an extension phone is connected either directly to the
machine (page 15) or to the same line as the machine and you want to
receive both faxes and voice calls on that line. All calls, including faxes,
must be answered by picking up the extension phone. ("TEL" will appear
in the fax mode display.)
To select the reception mode, follow the steps below.
♦
The reception mode is initially set to FAX ONLY mode.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
2
Press
3
Press
4
Select the reception mode:
: FAX ONLY
5
Press
Fax mode display when
FAX ONLY is selected:
10/03 11:37
90
) and then press
.
.
: EXT. TEL
repeatedly to exit.
FAX
MENU
.
Fax mode display when
EXT. TEL is selected:
10/03 11:37
Display:
FAX SETTING
1:RECEPTION MODE
1: FAX ONLY
The display briefly shows
your selection, then:
2: NUMBER OF RING
TEL