Sharp AM-400 Online Manual page 101

Polling (Requesting a Fax Transmission)
5
Your machine will call the other machine and receive the fax.
Being polled (Memory polling)
To let another fax machine poll your machine, you must first store the
document in memory using the following procedure. Transmission will take
place when the other fax machine calls your machine and activates polling.
You can choose whether to allow polling only once, or an unlimited number of
times. In the latter case, your machine can be used as an electronic "bulletin
board".
♦
If you allow polling only once, the document(s) will be automatically cleared
from memory after polling. If you allow polling an unlimited number of times,
the document will remain in memory until you clear it as explained in the
following section, Clearing a memory polling document.
1
Place the original on the document glass or in the auto document
feeder.
2
Make sure that the date and time
display of fax mode appears (if needed
FAX
press
3
Press
4
Press
5
Press
6
Press
unlimited number of times.
98
) and then press
.
.
to select SET.
to allow polling only once, or
MENU
.
Display:
FAX SETTING
1: FAX RESOLUTION
1: SET, 2: CLEAR
1: ONCE, 2: REPEAT
to allow polling an