Upgrade The Firmware [Upgrade] - Panasonic WV-SP302 Operating Instructions Manual

Upgrade the firmware [Upgrade]

Click the [Upgrade] tab of the "Maintenance" page. (☞ Pages 22 and 23: How to display/operate the setup menu)
The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further
information about the firmware upgrade.
[Model no.], [MAC address], [Serial no.], [Firmware
version], [IPL version], [HTML version], [IP
address(IPv6)], [Viewer software installation coun-
ter]
Information of each item will be displayed.
Step 1
Contact the dealer and download the latest firmware
onto a PC.
Important:
• A blank (space) cannot be used for the name of the
directory where the downloaded firmware to be
saved.
Step 2
Click the [Browse...] button and designate the down-
loaded firmware.
88
Step 3
Click the radio button respective to the desired option
to determine whether or not to initialize the settings
after completing the firmware upgrade.
Note:
• Note that the settings cannot be restored after an
initialization is operated.
Step 4
Click the [Execute] button.
→ The confirmation window will be displayed. When
"Do not reset the settings to the default after the
upgrade." is selected, the confirmation window will
not be displayed.
Important:
• After completing the upgrade, delete temporary
internet files. (☞ Page 96)
• Upgrade the firmware using a PC in the same sub-
net as the camera.
• Follow the instructions from the dealer when
upgrading the firmware.
• Use the designated file (extension: img) for the firm-
ware upgrade.
• Use the designated file, sp305_xxxx.img, for the
firmware upgrade.
* ("xxxx" indicates the version of the firmware.)
• Do not turn off the power of the camera during the
upgrade process.
• Do not perform any operation during upgrading and
wait until it completes.
• The following network settings will not be reset
when upgrading the firmware after selecting "Reset
the settings to the default after completing the
upgrade. (Except the network settings)".
On/Off for DHCP, IP address, subnet mask, default
gateway, HTTP port, line speed, bandwidth control
(bit rate), time & date
• The viewer software used on each PC should be
licensed individually. Refer to your dealer for the
software licensing.