Manually Setting The Scanning Size - Sharp AR-FX7 Operation Manual

MANUALLY SETTING THE
SCANNING SIZE
If you load an original that is not a standard size (such as an INCH size), or if the size is not detected correctly, you
must touch the [ORIGINAL] key and set the original size manually. Perform the following steps after placing the
document in the RSPF or on the document glass.
*Standard sizes:
Note
Standard original sizes are sizes that can be correctly detected when the original is placed.
Using the RSPF
Using the document glass
If a non-standard size original is loaded (including special sizes), the closest standard size may be displayed, or
the original size may not appear.
1
Touch the [ORIGINAL] key.
STANDARD
RESOLUTION
AUTO A4R
ORIGINAL
2
Touch the [MANUAL] key.
ORIGINAL SIZE
MANUAL
DED 2-SIDED
LET TABLET
3
Touch the desired original size key.
SPEAKER REDIAL
ORIGINAL SIZE
AUTO MANUAL
A5 A5R A4
A4R B4 A3
INCH
20
A3, B4, A4, A4R, A5, A5R
A3, B4, A4, A4R, A5
If the address directory
screen appears, touch
the [CONDITION
SETTINGS] key to
display the condition
settings screen. (p.7)
The sizes that can be
selected are displayed.
The [AUTO] key is no
longer highlighted. The
OK
[MANUAL] key and the
selected original size key
OK
are highlighted.
AB
Standard sizes
If you wish to select an INCH size, touch the
[AB INCH] key and then touch the desired
original size key.
SPEAKER REDIAL
ORIGINAL SIZE
AUTO MANUAL
8 x11 1 8 x11R 1 8 x13 1 B5
/ / /
2 2 2
INCH
4
Touch the outer [OK] key.
SIZE OK
MANUAL
A4R
OK
R A4
A3
AB
INCH
5
The selected size appears in the top
half of the [ORIGINAL] key.
EXPOSURE
STANDARD
RESOLUTION
A4R
ORIGINAL
"INCH" is highlighted and
INCH size keys are
displayed. To return to
OK
the AB palette, touch the
OK
[AB INCH] key once
AB
again.
You will return to the
initial screen. (Pressing
the inner [OK] key in the
step above returns you to
step 2.)