Table of Contents
Advertisement
q
[1] PRODUCT OUTLINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[2] SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
[3] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . 1
[4] EXTERNAL VIEW AND INTERNAL STRUCTURE . . . . . . . . . . . 4
[5] OPEREATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . 5
[6] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
[7] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . 8
[8] MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
[9] ELECTRICAL SECTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Parts marked with "!" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SERVICE MANUAL
Digital copier
MODEL
CONTENTS
SHARP CORPORATION
CODE : 00Z
Reverse Single
Pass Feeder (RSPF)
Single Pass Feeder (SPF)
AR-RP6
AR-SP6
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
ARSP6//A1E
Advertisement
Table of Contents
Related Manuals for Sharp AR-RP6
Summary of Contents for Sharp AR-RP6
-
Page 1: Table Of Contents
Digital copier Reverse Single Pass Feeder (RSPF) Single Pass Feeder (SPF) AR-RP6 AR-SP6 MODEL CONTENTS [1] PRODUCT OUTLINE ........1 [2] SPECIFICATIONS . -
Page 2: Product Outline
This machine is a duplex document auto feeder attached to a digital copier. 1. Unpacking It feeds originals automatically to allow continuous copying. For unpacking, refer to the figure below. [2] SPECIFICATIONS AR-RP6 AR-SP6 Document set direction Face up Document set position Right/Center reference... - Page 3 2. Remove the right cabinet. 5. Attach the right cabinet. Remove the screws and remove the right cabinet. Reattach the right cabinet to its original position and fix it with the screws. 6. Cut out the cut-out portion. 3. Remove the document glass and the right document glass holder.
- Page 4 50-06 to carry out adjustment referring to the service manual. 10. Attach the intermediate tray. (AR-RP6 only) Insert the intermediate tray all the way into the document feeder. AR-SP6/RP6 UNPACKING AND INSTALLATION...
-
Page 5: External View And Internal Structure
— PAPER Paper entry sensor Photo transmission Detects presence of documents. RSOL Pressure release solenoid — — AR-RP6 only Transport clutch — — SPF (RSPF) motor Stepping motor Drives document feed on the tray, trans- port, and paper exit roller. -
Page 6: Opereational Descriptions
[5] OPEREATIONAL DESCRIPTIONS 1. Major parts of the paper feed section 2. Out line of operations AR-RP6 (RSPF) 3,4 5 6 [Duplex documents] 1) Document set (Document set sensor ON) 2) Document size detection (Document width sensors W1, W2, W3... -
Page 7: Document Size Detection
3. Document size detection AR-SP6 (SPF) 1) Document set (Document set sensor ON) 1) Document size detection with the document set tray When documents are set on the document set tray in the auto selection 2) Document size detection (Document width sensors W1, mode of paper/copy magnification ratio, the document size is detected W2, W3 detect the document and paper and the copy magnification ratio are automatically selected. -
Page 8: Adjustments
Simplex: SIM 50-12 Add 1: 1 ~ 99 Center m 3.0mm off-center TEXT: 0.1mm shifted to (2) Magnification ratio adjustment (AR-RP6) SPF surface R side. Duplex: Center m 3.5mm PHOTO: Reduce 1: SPF back 0.1mm shifted to Note: • When performing this adjustment, check that the CCD unit is L side. -
Page 9: Disassembly And Assembly
[7] DISASSEMBLY AND ASSEMBLY 1. External fitting section 2) Document feed section cover Note: Turn the paw in the arrow direction. 3) Sensor PWB 2. Paper feed unit section 1) Paper feed unit AR-SP6/RP6 DISASSEMBLY AND ASSEMBLY – 8 –... - Page 10 4) Pickup solenoid 6) Pickup roller ass’y Note: When assembling the pickup roller ass’y 4, check that rib A is on Note: Remove section A of the pickup solenoid from the solenoid arm the rib of the solenoid arm. groove. When assembling, adjust the spacing between the clutch latch and sleeve with the pick-up solenoid pulled.
- Page 11 5. Document tray section 1) Document tray 2) Rack cover AR-RP6 4. Gate solenoid AR-RP6 only Bearing AR-SP6 Note: When assembling, check that the paper exit gate hook is set in the solenoid groove. When assembling, the bearing D-cut surface shuold be faced down.
- Page 12 3) Document length sensor SW 2) Drive frame unit 6. Drive frame section 1) Book sensor 3) Drive frame ass’y and drive belt AR-SP6/RP6 DISASSEMBLY AND ASSEMBLY – 11 –...
-
Page 13: Transport Section
7. Transport section 4) Pressure release solenoid AR-RP6 only 1) Clutch Note: Make sure the spring pin A is inserted into the slot. Note: When assembling, check that the rib is in the clutch groove A Make sure that the clearance between the position at which force and fix it with E-ring. - Page 14 4) Transport roller 5) PS roller Note: Note that the spring will come off when removing. AR-RP6 6) Paper feed paper guide lower Note: When assembling, check that the paper feed paper guide lower is securely set to rib A and boss B.
-
Page 15: Maintenance
[8] MAINTENANCE 7) Paper feed paper guide upper 1. Maintenance parts Name Work item Service call Remark Pickup roller Cleaning Separation unit Cleaning Replace when worn down. Front separation Cleaning sheet Paper feed roller Cleaning PS roller Cleaning Transport roller Cleaning Paper exit roller Cleaning... -
Page 16: Electrical Section
AR-SP6/RP6 ELECTRICAL SECTION – 15 –... - Page 17 AR-SP6/RP6 ELECTRICAL SECTION – 16 –...
- Page 18 AR-SP6/RP6 ELECTRICAL SECTION – 17 –...
- Page 19 AR-SP6/RP6 ELECTRICAL SECTION – 18 –...
- Page 20 AR-SP6/RP6 ELECTRICAL SECTION – 19 –...
- Page 21 4. Parts arrangement 4-1. Interface PWB a. Parts surface CN1(B3B-PH-K-R RD) CN3(B7B-PH-K-S) SGND SPFOPEN CN2(B3B-PH-K-E BK) N.C. SGND 24V1 /SPFOUT 24V1 CN4(B2B-PH-K-S) CN5(B26B-PHDSS) 24V1 24V1 24V1 /GSOL PGND PGND 21 SPFPSOL 22 PDOWNB CN6(B20B-PHDSS) SPFCLH PDOWNA 17 SPFRSOL 18 /SPFMODA 15 SPFGSOL 16 SPFMODA /PSOL /SPFOUT...
- Page 22 © COPYRIGHT 2003 BY SHARP CORPORATION All rights reserved. Printed in Japan. No part of this publication may be reproduced, stored in a retrieval system, or transmitted. In any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.